Lohia Mechatronik 卡布拉塑料挤出机械 用于主机的使用复合线 Lohia-tape-plant 希科 Mamta 依赖组件
Lohia Mechatronik
卡布拉塑料挤出机械
用于主机的使用复合线
Lohia-tape-plant
希科
Mamta
依赖组件
技术论文塑料
印度PVC的一个包装稳定器的指南

印度PVC的一个包装稳定器的指南

稳定器简介:

Stabilisers:
PVC分子对热和光不稳定。加热PVC会导致聚合物链破裂,从而释放盐酸气体。HCL催化更多的降解,降解可能会爆炸,从而释放大量的腐蚀性HCl和其他有毒气体。暴露于紫外线辐射也可以分解聚合物链,但比热降解慢得多。

热稳定器:
要处理PVC,必须稳定在处理温度下所需的热量作用。大多数稳定剂都包含与HCL反应并抑制进一步降解的金属元件。它们是金属盐,肥皂或配合物。PVC的稳定是一个庞大的主题,它们是UPVC公式中第二重要的成分,又是柔性PVC配方中的增塑剂。一些最重要的家庭是:
Type 形式 PHR使用了 明晰 毒性 气味 费用/公斤
粉末 2 -4 Opaque 有毒的 None 〜120-150
ba- cd 液体 1.5 - 2.5 清除 非常有毒 Slight 〜100卢比
BA -ZN 液体 2-3 清除 有毒的 Slight ~ Rs 190
CD -Zn 液体 2-3 清除 有毒的 Slight 〜Rs 220
Ca -Zn 液体 3 -4 清除 无毒 诺格尔。 〜250卢比
罐头 液体 0.5 -1 水晶 T&NON 强的 〜350卢比
BA -ZN 液体 2-3 清除 有毒的 Slight ~ Rs 190

最好选择目标应用程序的稳定器选择,最好与PVC树脂供应商的稳定剂供应商和技术服务单元进行协商,但是,作为指南,下表将是有用的。

稳定器应用领域:
Type 热稳定性 Main Applications Not recommended for
很好,特别是。长期。 电缆,管道和配件,袖子,轮廓。最便宜。 清除申请。可能是有毒的。
罐头 最好 透明管和板,高质量管,医疗 引起用铅染色的硫化物染色。最昂贵的稳定器。
CD -Zn 缓和 ROHS电缆,无毒。管道和挤压。 对于高热量历史。
ba- cd 好的 皮布,日历产品,鞋类。 无毒应用
CD -Zn 缓和 Foamed Leather Cloth 对于高热量历史。
金属锻炼 低的 润滑作用的联合稳定器 唯一稳定器。
Newer families of heat Stabilisers are being offered with the background of Heavy Metal environments contamination concerns. Organic Stabilisers and Calcium Zincs are in the forefront of this trend.

由于其成本相对较低和强大的稳定动作,铅稳定器历史上一直是最受欢迎的
• Lead Stabilisers: The common Lead Stabilisers are:
o tbls- tri碱性铅硫酸盐。强大的热稳定剂,因为它具有大约80%的PBO,这是吸收和中和HCl的活性成分,然后在加热时释放。它是无润滑的,不透明的,不能用于透明/易位应用中
o dbls-二元铅硬脂酸酯。润滑稳定剂对于在挤出机的混合和计量区润滑非常有用。半透明。
o ls-硬脂酸铅。最弱的铅稳定剂。强大的外部润滑剂,尤其是在早期挤出阶段。半透明。
o There are other Lead stabilisers like Dibasic Lead Phosphite, used when Light Stability is important and Dibasic Lead Phthalate, used for high speed extrusions, but these are not being covered in this article, as they have niche usage.

Calcium Stearate and Stearic acid are often used along with Lead stabilisers primarily to balance the Lubrication. CS is a weak stabiliser but an excellent internal lubricant, very effective in late stage lubrication at barrel discharge and die head. Stearic acid is a strong external lubricant, Excessive use can lead to screw slippage and poor gelation.

铅稳定器的铅含量。

铅稳定系统具有的一个缺点是,良好,平衡的配方需要所有铅稳定剂以及硬脂酸钙和更多润滑剂的组合。其他系统(例如罐头和混合金属)通常是一级稳定剂和一两个润滑剂。使用线索,可能需要仔细称重六到七种成分,这需要熟练的操作。

润滑铅基于一包系统
我过去广泛使用的高量PVC压力管的稳定器混合物在我的文章中提供了有关数量成本(第6页)的文章。


您会注意到,领先制造商提供的PVC管的常规等级的剂量建议起点约为2.2至2.4 PHR。这与上面的5-6个成分的剂量相匹配,并且是方便的一个包装系统的基础。

提供的最初的包装是预混合的单个组件稳定器。根据每批收费的树脂量,将所需数量称重为数据包。这与随后的实践相符,但是单独的5-6种成分容易称量不准确,特别是小食材。稳定器制造商过去批量混合了一个包装食谱,然后将仪表测量并包装在易于使用的小包中,例如25公斤。PVC,50公斤,等等。

在八十年代初期,对这个概念有很大的抵抗。我的个人经验是,在Shriram and Prc(DCW)中使用单个稳定器制定了近十年之久,当我去科威特时,我被介绍了一个包装系统的便利性。Baerlocher GmbH的一包吸引了人们的大开眼界,当我1978年回到印度并加入Waldies时,我想在印度介绍这一概念,并加入了著名的铅氧化物和PVC稳定器公司Waldies。

At that time, PVC Pipe markets was starting to grow rapidly with the leaders like Wavin, Finolex, Garware and Chemplast using large capacity imported extruders, while most the others were equipped with the venerable Windsor RC-100. Remember, at that time, PVC Pipes of the popular sizes up to 110 mm were reserved for small scale, and only the RC-100 (meaning 100 lbs/hr, about 40 kgs/hr) could be afforded by many who were entering the field as small-scale industries.

当时,管道的PVC食谱是由工厂技术负责人控制的严密保护的秘密。我的朋友Ala和我本人的Anil Anand先生感到沮丧,他们正试图推动一个包装概念,我们发现技术负责人根本不感兴趣地转向一个预先构造的一包。这将严重降低他们对公司的重要性!!

There was another factor working against the type of efficient one pack systems available abroad in the early eighties. The RC-100s with their co-rotating screws and low outputs and high residence times, required higher dosages, sometimes 4-5 PHR and had to be formulated like single screw extruders recipes. As the PVC pipe industry had started with small diameter conduits, many single screw extruders were pressed into service for water pipe. Even Chemplast were using large single screw extruders as per their American processing DNA. Added to the higher stabilisation costs, expensive flow promoters were needed for single screw pipes to match the strength of pipes made on the new imported Counter Rotating twin screw extruders.

The industry rapidly shifted to the imported Twin Screw extruders from companies like Cincinnati and Kraus Maffei, Battenfeld etc., and as the Pipe market was booming because of the WHO funded drinking water projects. The extruders were actually airlifted, such was the demand. Later in the 80s and early nineties, with more number of modern high output extruders being the norm, the one pack concept started taking hold.

预混合粉末的下一步是更安全地处理,无用的形式。工厂中处理铅稳定器的一个很大的缺点是,如果无法控制,管家和尘埃,则对工人的铅中毒的敏感性。通过将混合物加热到约160℃,从而使较新的一个包装递送系统开发出,使润滑剂,硬脂酸钙,硬脂酸铅和二纤维铅硬脂酸酯融化并与非熔融TBL形成面团。然后将面团挤出成颗粒或压成薄片。这种形式可以更安全地处理并逐渐发现。

从Litharge(PBO)开始的稳定器制造商进一步完善了这一点。他们用精心制备的硫酸,硬脂酸和其他一些润滑剂(如硬脂酸钙和特殊蜡)做出反应。反应完成后,所有PBO根据公式比例将所有PBO转换为TBL,DBL和LS。反应堆将其排放到旋转的鼓中,在那里糊状并剥落了糊状。


非润滑一包领导者没有足够的润滑剂来涂上混合物中的所有固体,并作为粉末出售。它们被广泛用于电缆和电线,轮廓,刚性和柔性的雪橇,注射模压配件等的应用。

除PVC窗口概况和注射模制配件等特殊应用外,除了稳定剂和润滑剂之外,还需要更多的成分,例如撞击修饰符和流动启动子。

Window profiles require 3.5-5PHR impact modifier and 1.5-2PHR Flow Promoter. When this is sold as a package in a one pack, the dosage must go up by 5-7PHR, that is 2.4+5=7.4 and 2.4+7= 9.4PHR. The price of the one pack goes up as the additives are quite costly.

在单个螺钉挤出机上处理的注射模制配件中,需要添加流动启动器。添加1.5phr时,一包剂量高达4Phr。同样,一包将比普通管道一包更为昂贵。

如果需要,也可以提供一个包装,例如抗紫外线,抗氧化剂等。One Pack制造商投入了很多投资,用于开发适合应用的合适润滑剂混合物,并为PVC管道的同一应用提供多个等级,例如正常,填充,高度填充,单个或双螺钉等。可以提供。一包的价格会随选择的特殊成分而变化。


剂量和定价
在PVC管道极具竞争力的领域,需求更便宜,更便宜,CACO3填充剂被添加到一个包装中以降低价格,但是,以保持相同的稳定效率,必须增加一个包PHR添加了惰性填充物的量。如果添加了1公斤的填充物,则毫无疑问,价格会下跌,但剂量上升了2.4+1 = 3.4。随着大多数处理器的大声疾呼,一包都在制造高度填充的管道,因此必须进一步提高一包,以维持与标准配方中相同的活动PBO的相同百分比。
The implications of adding fillers to cheapen One packs must be clearly understood, as Per Kg cost reduction is not the only factor.

这里有些例子:


在此示例中,我从标准的PVC管一包开始。如果使用了一个经济的填充物,则起点将为3.2 PHR,而不是2.4phr,并且到达填充加载时达到100 PHR,则必须将加载几乎翻倍以使无故障操作。处理器的一个常见错误是坚持使用BIS管中使用的同一PHR,因为它们会增加填充剂。这会降低主动PBO含量和润滑平衡,并可能导致严重的处理问题。

必须通过将每公斤一包成本乘以一包成本以及PHR所需的增加水平来进行研究,以达到每100 phr树脂的稳定成本,以确定其降低成本的有效性。

填充物的添加量,尤其是在较高剂量下会降低成本。但是重要的是,标准或经济的一包稳定成本是否较低。

Another factor which is important is the volume cost, for which the density of each ingredient is crucial. Anything added with a density more than PVC will increase the density (Like One Packs, Fillers, TiO2)

为了准确的密度计算和评估,必须知道所有成分的实际密度。一个包密度很重要,因为这个数字通常不在技术数据表中给出。

为了进一步清楚密度和填充加载的影响,请参阅我的文章//www.esper-magazine.com/plastic-technical-articles/volume-cost-and-ismportance-in-plastic-applications/1561


钙锌一包。
With the world moving away from Lead stabilisers. Calcium Zinc systems are becoming prominent for manufacturing Lead Free Pipes and where ROHS requirements are to be met.

硬脂酸钙是最常见的非铅稳定剂。但是,它的稳定功率非常低,更被视为一种非常有效的内部润滑剂,在模具头润滑方面起着重要作用,以使其平滑挤压和饰面。

钙肥皂已经与锌化合物结合使用,所得的钙锌稳定剂在稳定效率方面稳步提高。在稳定剂行业的密集研发的驱动下,钙锌在剂量中与3phr vs 2.4phr相当。

在钙锌系统中,润滑系统非常复杂,以提高效率,因此许多钙锌等级可作为一个包装,而不是单个成分。

另一个主要的稳定系统是在美洲非常受欢迎的罐子,因为它们在单螺钉挤出机方面非常有效,这在美洲也转换为双螺钉之前是常态。

诸如Accaptide家族之类的锡稳定剂都是液体。这并不使其有利于一个包装输送系统。通常,锡稳定管是由单个组件制成的,润滑剂平衡对于出色的性能至关重要。锡稳定剂比铅更昂贵,但是由于它们的效率如此之高,据报道,挤出机顶部的加工机降低到具有强大的甲基罐头的0.3-0.5 PHR,并且与铅系统具有竞争力。

有许多包装系统的供应商,其数字增加了,因为一个包装现在已被庞大的PVC管道和配置文件扇区使用

悉达多·罗伊(Siddhartha Roy)
Mr. Siddhartha Roy Mr. Siddhartha Royis a Chemical Engineer from IIT Kharagpur (1968). He has worked with plastics all throughout his career. He was actively involved in development of PVC markets and applications, especially Pipes and Fittings. He worked with Shriram Vinyls, PRC (now DCW) and Chemplast, manufacturers of PVC Resin & Compounds. He has managed a PVC Pipes & Fittings factory in Kuwait and helped Jain Pipes (now Jain Irrigation) set up their Pipe production facilities.

他在NASIK的VIP Industries领导研发,并且精通聚烯类,苯乙烯,聚酰胺和PC的处理。
He has been active in IPI activities and has delivered several Endowment lectures. He was recently awarded the Fellowship by the Governing council of IPI for his contribution to the Plastic Industry.
回到文章
{{comment.name}}发表了一篇文章。
{{comment.DateTimeStampDisplay}}

{{comment.comments}}

COMMENTS

0

没有评论显示。成为第一个发表评论的人!

*

Name Required.

*

需要电子邮件ID。

电子邮件Id Not Valid.

*

Mobile Required.

电子邮件ID和手机号码保持私密,不会公开显示。
*

需要消息。

点击更改图像 刷新验证码
模具为洛蒂on pump

模具为洛蒂on pump

回收塑料

塑料路

回收塑料袋