|
| 公司简介 |
印度斯坦塑料和机器公司是塑料加工机械和塑料挤出机器等领先的制造商，例如管道挤出机，锥形挤出机，用于PVC管道的双螺丝挤出机，PVC管道，PVC导管，PVC配置文件，PVC柔性轮廓，PVC柔性轮廓，电缆涂线，管道涂层，PVC膜，PVC膜，PVC膜，PVC膜，，PVC膜，PVC膜，，PVC膜，PVC膜，PVC胶片复合和螺丝和桶。HPMC挤出机在广泛的挤出过程中以质量，耐用性和一致可靠的性能而闻名。
HPMC建立在信任和诚信的传统基础上，该传统伴随着每个订单完成。在HPMC，我们的重点是完成订单并按时交付。我们努力了解客户的需求，并为他们提供量身定制的解决方案。
Mr. B R Kalra began this commitment to excellence over 30 years ago. The same commitment guides us today and has led to our evolution into one of the leading producers of plastic processing machinery in India. Serving a global market, our engineering, design and technical experience is at your disposal. We invite you to share your extrusion needs with us and experience our commitment to quality extrusions and customer service |
 |
| 产品 |
双螺丝锥挤出机for Pipes, Profiles, Sheets, Plates, Bars and Granules from PVC powder |
应用程序：对RPVC管sizes up to 315 mm , RPVC Dual Conduit pipe, PVC profile & PVC Compounding.显着功能
 |
高输出，低功耗，较少的摩擦，较低的剪切速率和强迫挤出。 |
|
当配备各种模具工具和下游辅助设备时，您可以直接从PVC粉末中生产管道，配置文件，床单，板，板和颗粒。 |
|
Large processing bandwidth and high counter pressure. |
|
Maximized melt output at low screw speeds and melt temperatures. |
Single Screw Extrusion line
应用程序：对RPVC管, PVC Profile, HDPE Pipe, PPR Pipe, PVC Cable, XLPE Cable, Re Processing, LLDPE Tubing, PVC Compounding, HM Film, LD Film & PVC Film
显着功能
|
Barrier design ( Double thread ) Screw for PVC Pipe for consistent melt homogeneity, excellent process control and stability for uncompromising end-product quality. |
|
凹槽饲料（用于HDPE管道和PPR管）和光滑的孔单螺钉挤出机技术，以进行优化的挤出工艺。 |
|
Single thread screw for wood pattern PVC profile. |
|
Broad range of extruders with screw diameters from 20mm to 150mm |
|
Designed to process all pelletized materials, including HDPE, PP, PVC, and others. |
|
多烯烃的输出速率高达450 kg/hr。 |
完整的单螺钉挤出线，带有电缆的向下流.
应用程序：用于PVC电缆和XLPE电缆
描述
|
不锈钢结构中使用的两层模具头挤出线 |
|
电缆反复包裹在挠度皮带轮上 |
|
由手动调节值控制的水流 |
|
Efficient transmission of the tractive forces |
|
Smooth transmission force |
|
最佳生产至关重要 |
|
Cable dia ranges from 10mm to 50mm |
单螺钉挤出机双直径�两级挤出机
应用程序：不需要用于重新处理Rafia，LD，HD，PP纸质废物（“印度首次在印度”）的双直径挤出机。
两级回收厂生产高达200 kg/ hr的描述：
|
印度首次生产的特殊设计“螺钉双直径”，用于重新处理Rafia，HD，LD，PP纸质形式废物。 |
|
该设计消除或最大程度地减少了切碎，研磨，致密化制备功能。 |
|
The combination of the greater feed capacity of the large diameter plasticizing section provides an effective and economical operation. |
两个阶段回收厂的规格：
Screw Design
双直径（150mm-1110mm）设计，其直径大的进料过渡到较小的直径主处理部分。飞机用硝化气浮出水面，硬度为65 hrc-68 hrc。
饲料部分
Featuring a generous feed throat opening and adequate water cooling jacket to prevent bridging, this essential component is designed to efficiently feed pallets, beeds, powder or paper form waste into the screw flights without thrust contamination.
Second Stage Extruder
Technique is based on "Two Stage Extrusion" for excellent filteration & material properties.
液压屏幕更换器
提供了液压屏幕更换器，以高效效率和更少的原材料浪费。
齿轮箱
螺旋齿轮箱，挤压器的螺旋箱有重力轴承。
Salient Features
|
First time in India production upto 200 kg/Hr from special design "DUAL DIAMETER OF SCREW" for reprocessing of RAFIA,HD,LD, PP paper form waste. |
|
This design eliminates or minimizes the shredding, grinding, densification preparation functions. |
|
The combination of the greater feed capacity of the large diameter plasticizing section provides an effective and economical operation. |
|
Screw design: Dual Diameter (150mm - 110mm) design with a large diameter feed transitioning down to the smaller diameter main processing section. The flights are hard surfaced with Gas Nitriding with hardness from 65 HRC - 68 HRC. |
|
进料部分：该基本组件旨在有效地喂养托盘，蜂蜜，粉末或纸纸将废物供应螺丝飞行，而无需污染，供应喉咙开口和足够的水冷却夹克以防止桥接。 |
|
第二阶段挤出机：技术基于出色的过滤和材料特性的“两级挤出”。 |
|
Hydraulic screen changer is provided for efficiency and less wastage of raw material. |
|
Force feeder ( Ram Type) is also provided for forced & continuous feeding of paper from waste into the barrel. |
|
变速箱：螺旋齿轮箱，两个挤出机都具有重力轴承。 |
PVC收缩膜植物
应用程序：包装的收缩膜
描述
|
Single screw extruder of PVC shrink film are used to cater a wide range of demands in packaging industry. |
|
Single screw extruder of PVC shrink film are used to cater a wide range of demands in packaging industry. |
|
All the A.C. Motors for the take up and extruder are synchronized to achieve the optimum production & immediate control of speed of 1st & 2nd take up to maintain the shrinkage ratio. |
|
The technology is based of "Double-Bubble" technique. Bubble calibration basket is made up of stainless steel, both inner & outer. Glass wool is inserted in between to bring down the heat loss. |
|
Shrink film winder is provided with two station & drive is given through torque motor. |
显着功能
|
Designing is based on special technique that can assure widthwise shrinkage upto 45% and lengthwise shrinkage less than 5%. |
|
所有接收器和挤出机的交流电动机都同步，以实现最佳的产生和对第一和第二速度的立即控制，以维持收缩比。 |
|
该技术基于“双重泡沫”技术。气泡校准篮由内部和外部不锈钢组成。插入玻璃羊毛之间，以减少热量损失。 |
|
Shrink film winder is provided with two station & drive is given through torque motor. |
单螺钉和枪管
 应用程序：对于刚性PVC，软PVC，PVC轮廓（单色），PVC轮廓（木质图案），PVC电缆，XLPE电缆，HDPE管，HM，LDPE，LDPE，LLDPE，PP，PP，RE PROCESS和复合物。
屏障螺钉，单线螺钉，MADDOC屏障螺钉，双螺钉，通风螺钉，淋巴结成型，绿色，SP系列，HDPE。
双螺丝挤出机
描述
|
在CNC“ WMW”德国加工的反旋转平行螺钉通过模拟软件制造线程铣床，以更好地性能 |
|
紧凑而可靠的齿轮箱 |
|
两块枪管结构用于经济替代万博平台盘口 |
|
数字熔体温度和背压指示器可轻松监视 |
|
挤出机驱动器，馈线和运输的驱动器的同步可以易于操作 |
|
A high specific output always mean high material throughput at low screw speeds. This results in low shear stress, gentle plasticizing & low shear wear |
|
The extruders are equipped with vertical feeders for processing of a wide range of different formulations. |
|
交流变频drive-optional |
|
Hopper loader-optional |
|
产品:双螺丝锥挤出机|Single Screw Extrusion line|双螺丝挤出机|
单螺钉挤出线和向下流|Two stage recycling plant|
单螺钉挤出机双直径�两级挤出机|
PVC收缩膜植物|单螺钉和枪管 |
|
|
应用程序：对于刚性PVC，软PVC，PVC轮廓（单色），PVC轮廓（木质图案），PVC电缆，XLPE电缆，HDPE管，HM，LDPE，LDPE，LLDPE，PP，PP，RE PROCESS和复合物。
