For Sale - UM - 19650 - Comerio PVC Calendering Line

1) Extruder X-Compound CK2000 year 2004
直径200毫米。l/d = 12
Capacity from 50 to 2,500 kg/h
Steel feed hopper with feed screw,
交流电动机7.5 kW，水平测量。

搅拌机完全配备了由镀铬钢，硝化铬钢和带有星状涂层的导元素制成的元素和牙齿。

内部加热恒温器电路的螺钉和车身
配有温度探针，液压打开系统，螺钉密封润滑，真空线连接。
Rotary knife cutting system with 2.2 kW gear motor.
Reducer with screw feed reversal system and external lubrication system.
Direct current motor 1.000 A.
Buss control panel, 700 Amps AC current capacity, including Siemens 1,200 Amps DC drive. A for main motor. Siemens S5 PLC.
真空线，包括灰尘圆顶，Robuschi 4 kW液体环泵，水回路系统。

2) Comerio Ercole 4 cylinder calender year 1976
Type 50 x 1,600 "L" reversed , loaded from above.
4 polished cylinders, table 1,600 mm diameter 560 mm
Cylinders 3 and 4, hot-ground 200 °C, mirror-finish chrome-plated,
RA = 0.005微米
Working temperature from 120 to 220 °C
缸内的流体分布管，旋转接头，柔性软管。
最大机械速度第四缸50 m/min
Cylinder supports with bushings, sliding on guides applied behind the calender
Mobile cylinders 1-2-4, each cylinder adjusted by mechanical groups, controlled by gearmotors and inverters.
轴承上的缸2和3的液压预加载装置。
Electric control and hydraulic maintenance of cylinder 3.
气缸之间的脸颊1-2，包含正在加工的材料，可通过齿轮运动调节。

Calender gearbox with 4 independent trains, DC control motors connected to the fast input shafts, nominal power 60,105,80,60 kW, slow output shafts connected to the respective calender cylinders by means of cardan joints.

Lubrication system for support groups with forced oil circulation.
Gearbox lubrication system with forced oil circulation.
用于预加载和预加载控制的液压系统。
分离和拉动的部分（纵向取向）和冷却。

具有镀铬和接地桌的钢制圆柱体分为机械控制和温度控制的组，机械速度可连续调节10至150 m/min。

分离/拉冷却
Cylinder diameter, mm: 98 250
控制和恒温器组7 4
Motors: direct current, kW 4 4

The cylinders are equipped with rotary joints for thermoregulation water and mechanical control.
用手动定位固定刀片切割部分。
修剪材料已经用尽，并送往Previero的磨植物。
恢复修剪边缘的可能性，缠绕两个侧卷轴。

Pulling unit consisting of rubber cylinder and omega pull calender, with two steel cylinders and rubber "gripper" cylinder, 4 kW direct current motors.

Final cooling section with two 800 mm diameter cylinders controlled by 4 kW DC motors.
线控制系统
Command and control equipment with Siemens S5 PLC
直接电流驱动器用于控制光纤缸电动机
Direct current drives for post-calender motor control
Temperature control section
Control panels on board the machine
Supervision Eletronic Systems, built in January 1993 and partially updated in April 1998, VME console - N.2 CPU master TVM922.

3) Sheeter Milltex in-line cutter, year 2000.

Pair of feeding cylinders, tension regulation through load cells, cutting equipment composed of fixed lower knife and rotating upper knife, transport unit composed of tow rollers and flat belts.

Stacking on pantograph, which is continuously lowered, keeping the stacking level constant.
Intermediate stacking equipment when changing pallets.
Evacuation equipment for collecting waste in a box.
Sheets: height 1.030-1.300 mm, length 850-1.580 mm, thickness 140 - 1.000 micron

4) Rewinder Tecno Coating Engineering 2000 for Production of reels.
风机器人类型，通过负载电池调节张力，自动卷轴更改，通过转置卸载。
Command and control equipment with Siemens S5 PLC.

产品输出中的产品功能
Coil: height 1.100 - 1.250 mm, diameter 500 - 800 mm, weight 300 - 800 kg, thickness 140 - 350 micron.
生产力1.100 kg/h。

5) Trim treatment plant - Previero,1992
通过将空气引入两个文丘里喷射器中，将装饰物吸进。

The exhausting air is generated by two fans, 4,000 mc/h flow rate and 15 kW motor each, and is discharged into the perforated sheet metal hopper located above the mill.

The mill, MU 408 N, includes two fixed counter-blades and three rotating steel blades, 800 mm long and placed on a 400 mm diameter rotor, driven by a 37 kW motor.

The grinded material is discharged through a grid with 12 mm holes and sucked in by a 2,000 mc intake fan, which sends the grinded material to a dedicated silo in the dosing plant.
Additional sheet material is fed into the mill by manual loading and pulling rollers.

6）电子系统厚度表
Year of construction: January 1993, HISCAN scanner, a Kr-85 measurement source.
通过安装新一代Sintel Smart Wix控制台，替换KR-85来源，对扫描仪进行全面改革，在​​2011年进行了修改。万博平台盘口

7) The machine is complete with technological service systems:
Fume extraction line including hood located above the calender, filtration unit with flat filters and drippers, fan and emission chimney, 400 mm x 14,000 mc/h.

8) Diathermic oil control units for temperature regulation of the calender and extruder cylinders, including circulation pump, control valves for hot and cold, air heaters for cooling and direct injection of diathermic oil from the main plant ring for heating.

水式控制单元，用于对压制器，拉动和冷却气缸的温度控制以及挤出机螺钉的温度控制，包括循环泵，冷热和冷控制阀，带有冰冷的水冷却液的交换器和带有透明油加热液的冰箱冷却液和交换器。戒指。