For Sale - UM - 7451 - Lyle Thermoforming Line

Lyle Thermoforming Line With former
Model: 150FH Former
- S/N 038271/104175001
- 480/3/60 operation
- 593 amps connected load powered by a 30 HP hydraulic pump station
- Ovens have quartz top elements crosswise to sheet travel and calrod bottom elements running in sheet travel direction
- Oven zones are, 8 top, 3 bottom, 2 front reds, and 2 side heaters, oven length is 4 shots @ 50" - 200" overall heated length
- Oven is computer controlled and uses solid state relays
- Form station has side pull pneumatic toggles top and bottom with air top balance cylinders and hydraulic bottom balance cylinders
- Form station - sheet line to top of platen 20.06"
- Sheet line to bottom platen 12.06"
- Total closed height 32.12"
- 50" w x 50" l maximum mold size
- 53" wide maximum sheet width
- 125 tons & 100 PSI over a 50" x 50" mold maximum form pressure
- 9" maximum depth of draw up and down
- 16" bottom stroke
- 11" top stroke
- Electric servo motor indexing with a maximum index of 50.25" controlled by an indramat servo drive unit
- Right hand infeed end of machine hi voltage and control panel location using Lyle Model TPC-9400 computer
Trim Press Model 150P2
- S/n 035047/103040007
- 480/3/60 operation
- 35.6 amps connected load
- Left hand facing stationary platen
- Controlled relay logic and interfaced to tpc-9400 on 150 fh former computer
- Moving platen strokes are 4.5", 7.5", 10.5", 13.5", & 16.5"
- Stationary platen window is 16.25" high x 50.5" wide
- Hinged platen for quick tool change & segen system in moving platen for tool lockup
- Vee-gibb platen guide system
- Standard versa system sheet feed with splitting feed cage for auto load canopy
- Auto loading power feed canopy with reverse trim extensions & auto lube grease system
- 10 HP vacuum pump for vacuum system not included

(For images, please see next pages)