For Sale - UM - 8890 - Gabler Thermoforming Machines

1) Gabler Thermoforming Machine (Year: 1997)

Model: DP 450 B
- Forming area (V x H): 430 x 150
- Depth of draw: 22 mm
- Material thickness (min): 0.6 mm
- Material thickness (max): 0.1 mm
- Number of stations: 0.6

Other Specifications
- Forming area: max. 430 mm x min. 150 mm
- Sheet width: max. 450 and min. 350 mm
- Depth of draw positive: 10 mm
- Depth of draw negative: 22 mm
- 40 cycles per minute in dry cycle
- Needed air 1250 l/min.
- Top heater 18,025 KW
- Low heater 5,18 KW
- 3 phase, 400 V / 50 Hz, N+P, 50 A
- Compressed air: 10 bar max and 6 bar minimum
- Total power: 23,5 KW

2) Gabler Thermoforming Machine (Year: 1995)

Model: DP 450 B
- Forming area (V x H): 430x150
- Depth of draw: 22 mm
- Material thickness (min): 0.1 mm
- Material thickness (max): 0.6 mm
- Products type: Lids

Other Specifications
- Forming area: max. 430 mm x min. 150 mm
- Sheet width: max. 450 and min. 350 mm
- Depth of draw positive: 10 mm
- Depth of draw negative: 22 mm
- 40 cycles per minute in dry cycle
- Needed air 1250 l / min.
- Top heater 18,025 KW
- Low heater 11 KW
- 3 phase, 400 V / 60 Hz, N+P, 50 A
- Compressed air: 10 bar max and 6 bar minimum
- Total power: 23,5 KW
- Currently working with McDonalds big and small lids (83 - 92 mm)

Both are in perfect condition and still working at 44 cycles. There are totally 5 molds with 2 machines. All of them are cross-hole lids for paper cups

(For images, please see next pages)