For Sale - SRP - 2197 - Hitco Coil Heaters

Intelligent Solutions to Precision Heating
Especially for the plastic processing industry, Hitco offers a wide range of Coil Heaters with different wattage data and measurements.

无处不在,精确控制和精确ly managed heating wattage is needed, the coil heater offers a mature solution with far reaching possibilities to suit individual requirements.

Hitco can look back on years of experience in the development and manufacturing of powerful Coil Heaters, Capability as basis for innovative products, which stand out due to their high manufacturing quality, an over average durability, extremely high loading capacity and a great flexibility.

Coil Heater is available from stock in many different measurements and wattage data. Furthermore, Hitco develops exactly that adjusted Coil Heaters, which you require for your individual application.

The wide range with further options
- Voltage and Wattage according to application.
- Delivery straight and bendable or coiled to Specifications (Considering the possible bending radius.)
- With flat & square cross-section for high efficiency due to flat surface.
- Choice of lengths of the heated respectively unheated zones at a maximum total length of 3000 mm
- Delivery with of without thermocouple.
- Additional covering with clamping band or reflection tube.
- Casted in brass.

The Coil Heater Advantage
- Highly non-corrosive.
- Low Profile construction.
- Maximum heat transfer due to more contact area.
- Even temperature profile.
- Precision fit on Hot Runner Nozzles.
- Higher watt density.
- SS Casting acts as a heat insulator.
- Robust cast body can withstand pressure during leakage & avoids de-coiling.

Typical Applications
- Hot Runner Nozzles & Bushings
- Die Casting Nozzles.
- Tube Extrusion.
- Pipe Forming
- Packing Machines
- Manifolds

Standard Specifications & Tolerances of Coil Heater
- Sheath Material: SS 316, SS 304 OR INCONEL 600
- Insulation Material: Mg0
- Heating Elements: NiCr 80:20
- Thermocouple: J Type and K Type
- Connection Wire: PTFE coated Nickel wire 1000 mm length
- Voltage Range: 24V - 250
- Power Rating: Depending upon application
Power Tolerance: +/-10%
H.V. Testing - 800 V (Bent Heater), 500 V between elements & thermo couple
Insulation Resistance (Cold) - >5 M ohms
Current Leakage - < 2 mA
Sheath Temperature - 750 Max
Unheated Length - 30-150 mm on connection side & 5 - 10 mm bottom side

Standard sizes for coil Heaters:
Round - Ø 3mm, Ø 4mm, Ø 4.5mm, Ø 5mm.
Square - 3×3mm, 3.2×3.2mm, 3.3×3.3mm.
Flat - 2.2×4.3mm, 2.5×4.3mm, 2.5×4.5mm, 3×4.5mm, 3×5.2mm, 3×5.5mm.

(For picture, please see next page)


For More Details Contact:
Ms. Anuradha Gupta
Hitco Electricals Pvt. Ltd.
sales@hitcoheaters.com, vikas@hitcoheaters.com
Tel: + 91-11-41061011
Mobile: +91-9350246220