出售-RM -2501
Specification
参考编号
RM - 2501地点
中国Product Details
填充剂万事群：
1）SMAS003：
SMAS003 is a specialized master batch to blow film and blow bottle.
Its carrier resin is LLDPE, only contains new type multi-functional micro particle, don't add other additive filler. We produce SMAS003 by special process technology. When we blow the film, SMAS003 has a good dispersion in the LDPE, LLDPE or HDPE. It also can improve the extrusion efficiency.
物理特性：
- MFI (190 Degree C, 5 kg): 15 +/- 5 g/10 min. (Test standard: GB3682-2000)
- 形状：灰色椭圆形粒子
- 密度：1.6-1.8
- 挥发性含量（90度C，3小时）：- 重量数量：400 +/- 50件 / 10G（测试标准：领先）
应用程序:
SMAS003 can be used to make heavy-duty PE packing bags; PE liquid packing film; hygienic products and sanitation product package, agricultural film; PE hand-bag; inside bag of package; high quality PE T-shirt bag; PE garbage bags. The PE film which add SMAS003 can be compounded with BOPP, BOPA and BOPET, don't affect their complex property and heat-seal property.
加法建议：
The addition rate is 5 percent to 15 percent, if the film is multi-layer extrusion, we advice you to add it in the core layer, the effect is better. Optimal addition rate will be confirmed by test.
包装：
PE重型袋，25公斤/袋。
Storage:
产品对水分敏感。可以很好地存储在原始包装中。打开后应消耗。如果受阻，请使用加热器在30分钟内用90度C干燥。
价格：US $ 580吨
2) SMAS05C:
SMAS05C is a specialized master batch for blow film and blow bottle.
Its carrier resin is LLDPE, only contains new type multi-functional micro particle, don't add other additive filler. We produce SMAS05C by special process technology.
When we blow the film, SMAS05C has a good dispersion in the LDPE, LLDPE or HDPE. When we blow the bottle, add it in the HDPE, SMAS05C can improve the extrusion efficiency.
物理特性：
- MFI (190 Degree C, 5 kg): 7 +/- 4 g/10 min. (Test standard: GB3682-2000)
- 形状：米色圆柱形颗粒
- 密度：1.6 +/- 0.2 g/cm3（测试标准：GB1033-86）
- 挥发性含量（90度C，3小时）：<0.15％
- 重量数量：400至500件 / 10G（测试标准：领先）
应用程序:
SMAS05C can be used to make heavy-duty PE packing bags, PE liquid packing film, hygienic products and sanitation product package, agricultural film, PE hand-bag, inside bag of package, high quality PE T-shirt bag, PE garbage bags. The PE film which adds SMAS05C can be compounded with BOPP, BOPA and BOPET, don't affect their complex property and heat-seal property.
SMAS05C也适用于生产空心吹塑的体积小于10升。
加法建议：
The addition rate is 5 percent to 35 percent. If the film is multi-layer extrusion, the addition rate of core layer is 15 percent to 20 percent and its surface layer is about 5 percent. The ideal addition rate will be confirmed by testing.
包装：
PE重型袋，25公斤/袋。
Storage:
产品对水分敏感。It can be stored well within original package. Once open its package, please consume it as soon as possible. If damped, please use heater to dry it with 90 Degree C within 30 minutes.
价格：US $ 730 MT
3) SMAS065:
SMAS065 is a specialized master batch for blown film. With LLDPE carrier resin and new multi-functional micro particle filler, it is manufactured by special techniques, don't contains any other additives. Add it in the producing process of LDPE, LLDPE HDPE blown film, the dispersive effect is good. In additional, it can improve the extrusion efficiency and improve some performance of film.
物理特性：
-MFI（190度C，5公斤）：10 +/- 3 g/10分钟。（测试标准：GB3682-2000）
- 形状：灰色椭圆形粒子
- Density: 1.5 to 1.6
- 挥发性含量（90度C，3小时）：<0.15％
- 重量数量：400至500件 / 10G（测试标准：领先）
应用程序:
SMAS065用于制作重型PE包装袋；卫生产品和卫生产品包，PE垃圾袋和购物袋；农业电影和班轮PE膜。
加法建议：
The addition rate is 5 percent to 25 percent. If the film is multi-layer extrusion, the addition rate of core layer is 15 percent to 20 percent and for surface layer is about 5 percent. Optimal addition rate will be confirmed by test.
包装：
防水袋，25公斤/袋。
Storage:
The product is sensitive to moisture and could be stored well within original package. It should be consumed immediately after opening. If it is damp, please use heater to dry it at 90 Degree C within 30 minutes.
Price: US$ 660 MT
4) SMAS001:
SMAS001 is a specialized master batch for blown film. With LLDPE carrier resin and new multi-functional micro particle filler, it is manufactured by special techniques, don't contain any other additives. Add it in the producing process of LDPE, LLDPE, HDPE blown film, it will not affect film's transparence. In additional, refer the bottle or drum, which wall thickness less than 1mm, SMAS001 also will not affect its transparence. It can improve the extrusion efficiency and improve some performance of film.
物理特性：
- MFI (190 Degree C, 5 kg): >/- 10 g/10 min. (Test standard: GB3682-2000)
- 形状：灰色椭圆形粒子
- 密度：1.7 +/- 0.1
- 挥发性含量（90度C，3小时）：- Weight by amount: 300 +/- 50 pieces / 10g (Test standard: leading)
应用程序:
SMAS001 is used to make transparent packing film, as the transparent package or matt package of sanitation towel, transparent fruit bag, transparent food bag, protective film and so on. It also suitable for the producing of hollow molding bottle and drum which wall thickness less than 1mm.
加法建议：
加法率为5％至15％。如果胶片是多层挤压，我们建议您将其添加到核心层中，效果更好。最佳添加率将通过测试确认。
包装：
防水袋，25公斤/袋。
Storage:
The product is sensitive to moisture and could be stored well within original package. It should be consumed immediately after opening. If it is damp, please use heater to dry it at 90 Degree C within 30 minutes.
价格：US $ 730 MT
1）SMAS003：
SMAS003 is a specialized master batch to blow film and blow bottle.
Its carrier resin is LLDPE, only contains new type multi-functional micro particle, don't add other additive filler. We produce SMAS003 by special process technology. When we blow the film, SMAS003 has a good dispersion in the LDPE, LLDPE or HDPE. It also can improve the extrusion efficiency.
物理特性：
- MFI (190 Degree C, 5 kg): 15 +/- 5 g/10 min. (Test standard: GB3682-2000)
- 形状：灰色椭圆形粒子
- 密度：1.6-1.8
- 挥发性含量（90度C，3小时）：- 重量数量：400 +/- 50件 / 10G（测试标准：领先）
应用程序:
SMAS003 can be used to make heavy-duty PE packing bags; PE liquid packing film; hygienic products and sanitation product package, agricultural film; PE hand-bag; inside bag of package; high quality PE T-shirt bag; PE garbage bags. The PE film which add SMAS003 can be compounded with BOPP, BOPA and BOPET, don't affect their complex property and heat-seal property.
加法建议：
The addition rate is 5 percent to 15 percent, if the film is multi-layer extrusion, we advice you to add it in the core layer, the effect is better. Optimal addition rate will be confirmed by test.
包装：
PE重型袋，25公斤/袋。
Storage:
产品对水分敏感。可以很好地存储在原始包装中。打开后应消耗。如果受阻，请使用加热器在30分钟内用90度C干燥。
价格：US $ 580吨
2) SMAS05C:
SMAS05C is a specialized master batch for blow film and blow bottle.
Its carrier resin is LLDPE, only contains new type multi-functional micro particle, don't add other additive filler. We produce SMAS05C by special process technology.
When we blow the film, SMAS05C has a good dispersion in the LDPE, LLDPE or HDPE. When we blow the bottle, add it in the HDPE, SMAS05C can improve the extrusion efficiency.
物理特性：
- MFI (190 Degree C, 5 kg): 7 +/- 4 g/10 min. (Test standard: GB3682-2000)
- 形状：米色圆柱形颗粒
- 密度：1.6 +/- 0.2 g/cm3（测试标准：GB1033-86）
- 挥发性含量（90度C，3小时）：<0.15％
- 重量数量：400至500件 / 10G（测试标准：领先）
应用程序:
SMAS05C can be used to make heavy-duty PE packing bags, PE liquid packing film, hygienic products and sanitation product package, agricultural film, PE hand-bag, inside bag of package, high quality PE T-shirt bag, PE garbage bags. The PE film which adds SMAS05C can be compounded with BOPP, BOPA and BOPET, don't affect their complex property and heat-seal property.
SMAS05C也适用于生产空心吹塑的体积小于10升。
加法建议：
The addition rate is 5 percent to 35 percent. If the film is multi-layer extrusion, the addition rate of core layer is 15 percent to 20 percent and its surface layer is about 5 percent. The ideal addition rate will be confirmed by testing.
包装：
PE重型袋，25公斤/袋。
Storage:
产品对水分敏感。It can be stored well within original package. Once open its package, please consume it as soon as possible. If damped, please use heater to dry it with 90 Degree C within 30 minutes.
价格：US $ 730 MT
3) SMAS065:
SMAS065 is a specialized master batch for blown film. With LLDPE carrier resin and new multi-functional micro particle filler, it is manufactured by special techniques, don't contains any other additives. Add it in the producing process of LDPE, LLDPE HDPE blown film, the dispersive effect is good. In additional, it can improve the extrusion efficiency and improve some performance of film.
物理特性：
-MFI（190度C，5公斤）：10 +/- 3 g/10分钟。（测试标准：GB3682-2000）
- 形状：灰色椭圆形粒子
- Density: 1.5 to 1.6
- 挥发性含量（90度C，3小时）：<0.15％
- 重量数量：400至500件 / 10G（测试标准：领先）
应用程序:
SMAS065用于制作重型PE包装袋；卫生产品和卫生产品包，PE垃圾袋和购物袋；农业电影和班轮PE膜。
加法建议：
The addition rate is 5 percent to 25 percent. If the film is multi-layer extrusion, the addition rate of core layer is 15 percent to 20 percent and for surface layer is about 5 percent. Optimal addition rate will be confirmed by test.
包装：
防水袋，25公斤/袋。
Storage:
The product is sensitive to moisture and could be stored well within original package. It should be consumed immediately after opening. If it is damp, please use heater to dry it at 90 Degree C within 30 minutes.
Price: US$ 660 MT
4) SMAS001:
SMAS001 is a specialized master batch for blown film. With LLDPE carrier resin and new multi-functional micro particle filler, it is manufactured by special techniques, don't contain any other additives. Add it in the producing process of LDPE, LLDPE, HDPE blown film, it will not affect film's transparence. In additional, refer the bottle or drum, which wall thickness less than 1mm, SMAS001 also will not affect its transparence. It can improve the extrusion efficiency and improve some performance of film.
物理特性：
- MFI (190 Degree C, 5 kg): >/- 10 g/10 min. (Test standard: GB3682-2000)
- 形状：灰色椭圆形粒子
- 密度：1.7 +/- 0.1
- 挥发性含量（90度C，3小时）：- Weight by amount: 300 +/- 50 pieces / 10g (Test standard: leading)
应用程序:
SMAS001 is used to make transparent packing film, as the transparent package or matt package of sanitation towel, transparent fruit bag, transparent food bag, protective film and so on. It also suitable for the producing of hollow molding bottle and drum which wall thickness less than 1mm.
加法建议：
加法率为5％至15％。如果胶片是多层挤压，我们建议您将其添加到核心层中，效果更好。最佳添加率将通过测试确认。
包装：
防水袋，25公斤/袋。
Storage:
The product is sensitive to moisture and could be stored well within original package. It should be consumed immediately after opening. If it is damp, please use heater to dry it at 90 Degree C within 30 minutes.
价格：US $ 730 MT
