Required - TTE - 2248 - Universal Tensile Tester
Specification
Reference Number
TTE - 2248Product
Universal Tensile TesterManufacturer
IndianProduct Details
Universal Tensile Tester is used for determining the ability of the material to withstand forces that tend to pull it apart & to determine to what extent the material stretches before breaking.
Different types of plastic materials are often compared on the basis of tensile, flexural strength, elongation, & tensile modulus data. Many plastics are very sensitive to the rate of straining and environmental conditions. The tensile property data are more useful in preferential selection of a particular type of plastic from a large group of plastic materials.
Tests for tensile strength (stress at fracture of the specimen) and elongation (extension of material under load of plastics. The first provides a measure of the breaking strength of the material but is radically affected by the rate of loading and the ambient temperature. Tensile strength in kgf/cm sq. = load (kgf) / a x b (cm sq.) Elongation % = (L2-L1) x 100/L1. Standard test methods: BS 2782 method 301, ASTM D 638, ISO R527.
Tensile Testing machine, it has a fixed stationary member, carrying one grip and a movable member carrying a second grip. Self - aligning grips employed for holding the test specimen between the fixed member and the fixed member and the movable member prevent alignment problems. A controlled velocity drive mechanism with high degree of speed accuracy is used. A load - indicating mechanism capable of indicating total tensile load with an accuracy of +/-1 percent of the indicate value with digital display system. The advent of new microprocessor technology has virtually eliminated time -- consuming manual calculations. Stress, elongation, modulus, energy, and statistical calculations are performed automatically and presented on a visual display or hard copy printout at the end of the test.
Features
- Specimen clamping: Mechanical vice type grip.
- Elongation: MAX. 1000 mm. Least count: - 0.1 mm.
- Capacity: 0-100, 0-250, 0-500 Kgf. with 0.1 kgf measuring least count.
- L.C.D. Based digital display for "Load At Yield & Break" and grip extension measurement at "yield & break" and calculated break stress, Yield stress and flexural stress.
- Fully micro controlled process.
- Auto measuring system for elongation between grips to grip.
- Testing speed: AC drive with variable or fix speed control system or as per customer requirement.
- Constant display at actual speed.
- Computer interfacing port with software to calculate, store and graph facility of load v/s. elongation with indication of yield & break points.
- Dumble cutting die and dumble cutting press is available with extra cost as per the customer requirement.
- Power requirement: 220 volt - Single phase or 415 volt - III phase.
Different types of plastic materials are often compared on the basis of tensile, flexural strength, elongation, & tensile modulus data. Many plastics are very sensitive to the rate of straining and environmental conditions. The tensile property data are more useful in preferential selection of a particular type of plastic from a large group of plastic materials.
Tests for tensile strength (stress at fracture of the specimen) and elongation (extension of material under load of plastics. The first provides a measure of the breaking strength of the material but is radically affected by the rate of loading and the ambient temperature. Tensile strength in kgf/cm sq. = load (kgf) / a x b (cm sq.) Elongation % = (L2-L1) x 100/L1. Standard test methods: BS 2782 method 301, ASTM D 638, ISO R527.
Tensile Testing machine, it has a fixed stationary member, carrying one grip and a movable member carrying a second grip. Self - aligning grips employed for holding the test specimen between the fixed member and the fixed member and the movable member prevent alignment problems. A controlled velocity drive mechanism with high degree of speed accuracy is used. A load - indicating mechanism capable of indicating total tensile load with an accuracy of +/-1 percent of the indicate value with digital display system. The advent of new microprocessor technology has virtually eliminated time -- consuming manual calculations. Stress, elongation, modulus, energy, and statistical calculations are performed automatically and presented on a visual display or hard copy printout at the end of the test.
Features
- Specimen clamping: Mechanical vice type grip.
- Elongation: MAX. 1000 mm. Least count: - 0.1 mm.
- Capacity: 0-100, 0-250, 0-500 Kgf. with 0.1 kgf measuring least count.
- L.C.D. Based digital display for "Load At Yield & Break" and grip extension measurement at "yield & break" and calculated break stress, Yield stress and flexural stress.
- Fully micro controlled process.
- Auto measuring system for elongation between grips to grip.
- Testing speed: AC drive with variable or fix speed control system or as per customer requirement.
- Constant display at actual speed.
- Computer interfacing port with software to calculate, store and graph facility of load v/s. elongation with indication of yield & break points.
- Dumble cutting die and dumble cutting press is available with extra cost as per the customer requirement.
- Power requirement: 220 volt - Single phase or 415 volt - III phase.
