| Adva-Tech design and offers cooling towers to suite specific requirements, and identifies the cooling tower as an integral part of a process rather than an isolated unit. Cooing tower is designed to enhance efficiency of the process as a whole. Adva-Tech has a vast range of models to suit different requirements. The capacity range is from 5 TR to 600 TR in single Cell and as per requirement of client in multi cell. |
Round Bottle Type Cooling Towers |
 |
| Works on the principle of counter flow where the water flows down while the air is pulled upwards by a fan. As the water flows further through the system, the air encounters is fresher, in other words cooler and less saturated with moisture. Special composition of raw materials are selected to withstand corrosion, to resist water borne bacteria and organisms, is light in weight which permits roof installation without any special reinforcement. Vertical induced draft counter-flow design permits installation in any direction with freedom. It consumes less power (energy) overall because of less air resistance to water, saving in operational costs. A direct driven axial fan ensures the system is free from problems faced with belt & gear drives. |
|
|
方型冷却塔 |
 |
• Operates on the induced draft counter flow principle operation
• The fan creates air movement vertically up the tower across the fills in opposition to the water flow
•热循环水进入水入口标头，并通过非堵塞的PP喷嘴喷洒。
水分配甚至是
• Well designed PVC Drift Eliminators are fitted to reduce Drift Losses
•为方形纤维玻璃冷却塔提供了检查门，以便于进行检查和维护
• Square tower can be installed in multi cell also |
|
|
Fan & Fill Less Natural Drafts Type Cooling Tower |
Adva-Tech Fanless/Fill less/Jet type Cooling Towers are specially designed for giving ultimate performance with virtually no maintenance.
这些冷却塔是基于将热水转移到大气空气的主管，以使热量和水以最大的传热方式彼此接触。
Material of construction of these Cooling Towers is weatherproof FRP louvers. The water distribution system is made up of GI/PVC and heavy duty MS Hot Dip Galvanised structure, Specially designed Nylon/PP nozzles are used for achieving maximum efficiency. |
 |
|
|
 服务
•设计，制造和供应冷却塔
• Revamping & renovation of cooling towers
•FRP和木制冷却塔的备件
• Maintenance and service of FRP & Wooden Cooling Tower
•供应水处理化学品
• Undertake Annual Maintenance Contract of FRP cooling towers
• Convert Geared driven to direct driven in wooden cooling towers
•从事FRP衬里工作
Our Spares include: |
|
FRP Casing: |
| The tower casing is made of selected grade materials of tough Fiber Glass Reinforced Polyester resins, etc. Additional embossing is done for extra strength in case of large capacity cooling towers. |
FRP Basin: |
| 盆地是由FRP制成的，它完全泄漏了。始终确保最大水位是深层的。 |
PVC Fills: |
| Our standard fill is constructed of a honeycombed PVC film. This honeycomb construction ensures even water distribution and high efficiency water to air heat transfer. The PVC fill shall withstand a maximum inlet water temperature of 55 Deg. C. We can supply HIPS and ABS fills for high temperature application up to 100 Deg. C. |
Drift Eliminators: |
| It is of PVC fixed type and ensure water carry over losses shall not exceed 0.02% of circulating water flow. |
Water Distribution System: |
In Round Cooling Tower : Specially designed rotary sprinkler head is made of aluminum alloy to avoid corrosion, also fitted with sealed ball bearings to take care of thrust & radial loads. Sprinkler Unit, which rotates through Inlet Water pressure. Distribution of water is uniform through out the fill Area.
In Square cooling tower : Static water distribution system made of GI/PVC pipe with multiple branch arms and non clogging PP spray nozzles for low pressure drop and uniform water distribution throughout the fill area. |
Fans |
| The axial flow direct driven fans have been specifically designed for cooling tower use. It is made of cast aluminum blades and hub. They provide a large volume of stable air at low pressure while maintaining desired low noise levels. We can supply FRP fan with MS HDG or aluminum alloy hub as per client�s requirement. |
Electric Motors |
| 专门设计的完全封闭的垂直法兰安装的电动机，带有延伸的螺纹轴和密封的顶部，用于冷却塔。电动机具有防风雨IP-55的保护程度，适用于炎热和潮湿的氛围。 |
支撑结构 |
| All supporting structure are of hot Dip Galvanised Steel We can also supply spares for wooden cooling tower like fan assembly, gearbox, drive shaft, coupler, bushing , spray nozzle, flow control valve, wooden and PVC splash bar, PVC �V� bar, SS 304 Grid, etc. |
|
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
FRP Casing |
|
FRP Basins |
|
PVC Fills |
|
Sprinkler Pipes |
|
Sprinklers |
|
Drift Eliminators |
|
|
|
 |
|
 |
|
 |
|
 |
|
 |
|
|
|
Electric Motors |
|
Aluminum Fans |
|
FRP fans |
|
Sprinkler with Branch Pipes |
|
Static Water
Distribution System |
|
|
|
|
|
|
|
|
