忘记密码?1Manbetx
EmailId Required.
Email Id Not Valid.
Filter
Share This Page
双螺钉塑料加工挤出机正在销售。源二手twin screw extruders。还可以进行翻新的双螺钉挤出机,以进行复合,主机,管道和配置文件。
出售 - 二手双螺丝挤出机正在销售,翻新的双螺丝挤出机以复合
Model:- LSM 34 GL Has 42:1 L/D barrel but no screws elements included. Has 12 barrel sections total with 3 open barrel sections (vents) included in total. Driven by 11 kW (15 HP), 220......
UM 21168
:-美国
Model :- CM80 80 mm Screws Conical Screws Counter rotating Spare parts included: Old barrel & 2 screws...
UM 21123
:-欧洲
电动机,齿轮箱,挤出系统,加热系统,44:1螺钉直径的L/D评估冷却系统:-62.4毫米,桶长的240毫米x 11毫米和500 rpm最大。揉……
UM 21117
:-India
New parallel screws New scabbard Motor power: 60 kW Tube geometry screws Max flow: 400 kg / h...
UM 21119
长度: - 3.9 m宽度: - 1.3 m高: - 1.7 m的重量: - 机器上的2 T小时:-64478 ...
UM 21058
Screws are 102.2 mm at feed tapering to 75.5 mm at discharge. Approximately 17:1 L/D ratio (screws are 1569 mm long). Unit is powered by a 7.5 HP Reliance DC motor, 1750/2300 rpm and ......
UM 21008
型号:-KMD90具有电加油的油冷却桶,包括温度控制面板,由大约60 hp DC DC电动机带有SCR控制。单独可用的是下游f ......
UM 20967
Model:- Mic 27 40GL Has co-rotating inter-Meshing screws, 9 electrically heated water cooled barrels. Gearbox is direct driven by a 10.5 KW (14.3 HP) D/C motor with SCR allowing Maxi......
UM 20981
型号:-088具有空气冷却挤出机,温度控制面板,带有温度压力模块的准备中心。包括直流电动机和控制。
UM 20984
型号:-ZE25型ZE25电加热和空气冷却的枪管,包括八个部分,包括饲料喉咙,42英寸枪管中心线高度,侧馈入口和排气SEC .....
UM 20983
具有36/1 L/D桶,由200 hp DC电动机驱动,并具有SCR控制。包括温度控制面板。没有侧馈....
UM 20962
Model MP-19-TC 19 mm diameter screws, 40:1 l/d, electrically heated, Water cooled barrel, split barrel design, 2 kw dc motor, 500 rpm screw spped, With Ktron main feeder, 2 B......
UM 20966
型号PharmAlab 16 TSG,不锈钢结构,直径16毫米,旋转,40:1 l/d,1000 rpm最大螺钉速度,带7桶区,1050毫米中心线高度,带有.....
UM 20585
ZSK40型号。有46/1 L // D排气枪管,11桶截面。由50 hp DC电动机驱动,并具有SCR控制。包括侧馈。挤出机配备了517 rpm螺钉速度。
UM 20959
Model ZSK20 Extruder is driven by a 5 hp AC motor with motor controller supplying 588 rpm screw speed. Has 40/1 L/D, 3/1 gear ratio, / 37 Newton Meter torque capacity per screw shaft.......
UM 20958
Model ZSK50. Rebuilt May 2011. Has 1.593/1 gear ratio supplying 1100 rpm screw speed with 815 Newton meters per shaft. Includes side feeder, Electrically heated water cooled barre......
UM 20960
Type: ZSK 25 P8.2E WLE Output: 80 - 120 kg / h Screw diameter : 2 x Ø 25.0 mm L / D: 36: 1 Drive / motor: 20.0 kW (DC)...
UM 20911
Model ZSK 92, 36:1 L/D. Co-rotating, 9 housing sections, electrically heated, water cooled. Max screw speed is 400 rpm via a gearbox by a 525 hp/350Kw-415 volt/50 cycle/3 phase motor.......
UM 20917
类型:ZE 110 R X 28D UTMI输出最大2,200 kg / h螺钉直径:2xØ127.0mm l / d / d:28:1(可能扩展处理单元的扩展)驱动器 /电动机:250.0 kW(AC) - 水冷却..。
UM 20910
Type: ZE 60 R x 24D UTXmi Capacity:- up to 800 kg/h Screw diameter: 2 x Ø 69,1 mm L/D: 24:1 (extention of processing unit possible) Motor: 68,0 kW (AC) – water cooled ...
UM 20909
1mantbex
需要电子邮件ID。
需要主题。
Message Required.
Please enter First Name.
Please enter Last Name.
请输入公司名称。
请选择国家。
手机号码要求ed.
Steer Engineering Pvt. Ltd.
Kandui Industries Private Limited
GRP LIMITED
请输入要求。
请输入手机。
需要用户ID。
User Id Not Valid.
Password Required.
密码必须长4到15个字符,and may consist of hyphen (-), underscores (_), dot (.),and asterix (*).
确认密码。
Password & Confirm Password do not match.
Your Name Required.
Friend's Name Required.
朋友的电子邮件Id。
朋友的电子邮件ID无效。