Forgot password?1Manbetx
需要emailID。
电子邮件Id Not Valid.
筛选
Share This Page
列出了用过的塑料化合物线,用于总体斑点生产的挤出机,用于复合PVC,PP,ABS的双螺丝挤出机。LLDPE和其他工程聚合物
For Sale - Used Plastic Compounding Line, Equipment and Twin Screw Extruders
G100型,316型不锈钢结构,100升工作能力,70批量的尺寸,316不锈钢夹克室和排放门,带有旋转联合的芯螺钉,.....
UM 18759
: -USA
Screw Ø: 2 x 120 mm L/D: 26 Capacity appr.: 600 - 1200 kg/h Drive: 222 kW Material: PE, PP, PS, ABS Twin-screw extruder, co-rotation, Segmented screws + barrel, 3 ventings, Vacu......
UM 19062
: -Europe
螺丝Ø:2 x 96毫米L/d:39容量Ard.:800-1100 kg/h驱动器:252 DC KW材料:PE,PP,PS,PS,ABS DC Motor,Corotation,Corotation,Venting,Venting,Vinting,真空泵,侧馈器,侧馈器,屏幕更换器......
UM 19061
螺丝Ø:2 x 126.1毫米L/d:28容量Ard.:1900-2200 kg/h驱动器:250 AC kW材料:PE,PP,PS AC电机,分段螺丝和圆柱体,共旋转,螺丝速度300 rpm,......
UM 19063
APV 125MP复合线枪管30D打开枪管以检查衬里和轴,液压功能正常。衬里1.-饲料,2.5D状况良好的衬里2.- I ......
UM 17969
disch Farrel 4 lmsd连续non-aim混合器——一边arge, Used for compounding polymers, 750 lbs/hr 8 HLMI-HDPE, 1500 lb/hr 0.8 MI-I-LDPE, Equipped with 150 HP DC motor with SCR drive......
UM 17784
disch Farrel 4 lmsd连续non-aim混合器——一边arge, Used for compounding polymers, 750 lbs/hr 8 HLMI-HDPE, 1500 lb/hr 0.8 MI-I-LDPE, Equipped with 150 HP DC motor with SCR dri......
嗯17824
Refeinhauser 100mm双螺钉化合物以前将UPVC干燥混合物,磨碎和芯片更加复杂。目前根据Custo进行重建并装有全新的螺丝和枪管……
UM 17564
Line是2000年的新产品,从2005年到2008年的使用有限。包括带有自旋烘干机的晚会水下颗粒系统。PVC的线额为每小时1500-1750千克。...
UM 17674
: -澳大利亚
Krauss Maffei KMD2-10复合线,带有模切式刀具和颗粒状线,以前以大约输出的形式将UPVC干燥混合物复合。350-400公斤/小时。在工作中取出的线……
UM 17563
净混合卷30.8升最大扭矩2864公斤标准驱动变速箱类型SP 630编号40012 HP等级1200 100/300 RPM DC可变速度电机883 kW 1200 hp 1000 rpm 600 vo .....
UM 17494
1- Cooling vertical air pellets Dryers, ST.ST, Urbar 1 side vibrators, Diameter 700 x 2250 mm 2 - Vibrant sieve pellets Filtra diameter 800, ST.ST 3 - Di......
嗯17162
1Dosing Extruder Diameter 25 mm, Degasser, Variable Speed, Motor D.C. , 18 kW, 5 Barrel Zones Heating and Air Cooling L / D = 32 RPM Max Screws 1,000 PLC control. ......
嗯17161
最大限度。300/600 kg/hr org/inorg。颜料。APV MP 2065(Ø65毫米x 25 d)yr 92。56 kW D.C电机,最大螺钉速度500 rpm,8桶块,10个温度区,死亡WI ......
UM 17108
Max 150/300 kg/h. Org/ Inorg. Pigments. Maris TM-58-V ( Ø 58 mm x 32 D). 48 kW D.C Motor, Max Screws speed 300 rpm , 6 Barrel Blocks , 9 temperature zones , Die with ......
UM 17106
Max 200/400 kG/H. Org/ Inorg. Pigment APV MP 2050 , Ø 50 mm x 30 D . 40 kW D.C Motor, Max Screws speed 500 rpm , 7 Barrel Blocks , 12 temperature zones , Die with 8 h......
UM 17105
最大限度。350/600 kg/h。Farrel CPM 500,2陡峭的系统。反旋转化合物2个转子,直径4英寸,500 rpm,75 kW dc电机。排放挤出机单螺钉直径6英寸,.....
UM 17109
最大180/350 kg/h。org/ inorg。颜料。Werner Pfleiderer铜铜ZSK(Ø53毫米x 40 d)。36 KW D.C电机,最大螺钉速度300 rpm,12桶块,7温度Zon ......
UM 17107
We are looking for:- 1. Micro compounder (It should be single or twin screw extruder of lab scale) 2. Pilot scale twin screw extruder for compounding (~10 kg/hr). ...
UM 16998
: -Uttar Pradesh
Screw Diameter: 140 mm Throughput: 700 kg/h Screw L/D Ratio: 20 Screw Configuration:Parallel Type Of Rotation:Counter rotating Degassing System:Yes Type Of Cooling:Oil Dosing Unit:......
嗯16421
1mantbex
电子邮件Id Required.
Subject Required.
需要消息。
请输入名字。
请输入姓氏。
Please enter Company Name.
Please Select Country.
需要手机号码。
Steer Engineering Pvt。有限公司
Please enter Requirements.
Please enter Mobile.
User Id Required.
User Id Not Valid.
要求输入密码。
密码must be between 4 and 15 characters long,并且可能由连字符( - ),下划线(_),点(。),和asterix(*)。
Confirm Password Required.
密码并确认密码不匹配。
Your Name Required.
Please select Country.
朋友的名字需要。
朋友的电子邮件ID所需。
Friend's Email Id Not Valid.