Forgot password?1Manbetx
EmailId Required.
Email Id Not Valid.
Filter
Share This Page
Source used thermoforming machines, second hand vacuum forming machinery, used inlinethermoforming machines, refurbished sheet extrusion lines
For Sale - Used Thermoforming Machine, Used Vacuum Forming Machinery and Inline Thermoforming Equipment
Max Mold Size:- 48" x 72" Number of Stations:- 3 Top Oven:- Calrod (needs repairs) Top Platen Stroke:- 24" Bottom Platen Stroke:- 32" Platen Drives:- Air Acutated Control:- Relay E......
UM 20451
:-Europe
Max Mold Size:- 48" x 84" Top Oven:- Quartz Paneling Top Oven Zones:- 8 Bottom Oven:- Quartz Paneling Bottom Oven Zones;- 8 Top & Bottom Platen Stroke:- 24" Platen Drives:- Air Actu......
UM 20449
:-USA
Stationary Window Opening:- 15" x 30" Press Tonnage:- 15 Tons Cycle Times:- Approx. 100 Strokes Per Minute Eletrical Requirements:- 480V- 3 Ph (61.05 Amp Draw) Equipped with: Power......
UM 20448
Max Mold Size:- 43" x 74" Top Oven:- Quartz Infrared Elements Number of Top Heater Banks:- 204 pcs. Bottom Oven:- Quartz Infrared Elements Number of Bottom Heater Banks:-96 pcs. Bott......
UM 20447
Max Mold Size:- 28" x 40" Top Ovens:- Quartz Panel Bottom Ovens:- Calrod Oven Length:- 200" Mold Shut Height:- 20" (10" above / 10" below) Top:- 6.0" Platen Drives:- SWECO Servo Mot......
UM 20446
Model:- KMV 50D Quantity 2 Hours 16,300 / 17,500 Stations Three - Form / Cut / Stack (A/B Stacking on 2005) Maximum forming area 500 x 350 mm Minimum forming area 300 x 100 mm Max......
UM 20388
Model 125FT, Dual forming stations, Approximately 29" wide x 25" long platens, 5" stroke, 7' long oven with top quartz heater, Bottom calrod heaters, control panel, 7.5 hp hydra......
UM 20332
Stations:- Forming and Cutting Max Tool Size:- 720 x 525 mm Depth of draw:- 120 mm Max material width:- 740 mm Max Sheet Thickness:- 1.5 mm Max mould closing force:- 50 Tonne Maximu......
UM 20292
Approx Hours 28,000 Stations Three Max Forming Area 560 x 410 mm Max Tool Size 585 x 435 mm Depth of Draw 120 / 120 mm Max Material Width 610 mm Max Mould Closing Force 120 kN Max ......
UM 20291
Stations Three - Forming, Cutting and Stacking Max Forming Area 750 x 540 mm Depth of draw 150 / 150 mm Max material width 800 mm Max Sheet Thickness 1.5 mm Operating Pressure 6 Bar ......
UM 20110
Extruder OMV D100 with co-extruder D60 Thermoforming machine OMV F36 with a stacking system 3 Packaging machine Tecno Pack FP022 Thermo stamp for producing coffee cups Crushing uni......
UM 20060
:-Russia
90 mm T-DIE for RR sheet line 250 kg production per hour Ballon type production 100 kg per hour 2 machine of Rajoo thermoforming 65 x 35 6 moulds of mould craft 81 die 95 die 72......
UM 19869
:-India
Max forming area:- 700 x 345 mm Max depth of draw:- 150 mm Max material width:- 750 mm Punching force:- 350 kN Equipment Available: Gabler M91 Thermoformer Gabler Easy Stacker Sys......
UM 17662
1) 500 x 280 mm Illig Model RDM 50K pressure forming machine With mechanical plug, RS75B Skeletal grinder. Illig stacker. 125 mm max draw 2) 500 x 280 mm Illig Model RDM 50K p......
UM 18537
Max Mold Size:- 50" x 50" Top Oven:- Calrod Number of Heater Zones:- 20 Bottom Oven:- Calrod 2 - Shots @ 50" Top Draw Depth:- 8" Bottom Platen Stroke:- 11" Form Station Tonnage:- 1......
UM 19694
Model:- 800/2 PS cup production machine consisting of: Electrical cabinet Extruder of 100 Extruder of 50 Changers Forming machine (cycle from 22 to 28) 60 cavity mold Shearing Gr......
UM 19724
Model:- CS-5464SP Quad Series Max Mold Size:- 54" X 64" (1372 mm X 1626 mm) Oven Length:- Heated Oven Length 320" (8128 mm) Platen Drives:- Electric Motors Top / Bottom Maximum Open......
UM 19693
600 mm wide Gabler model D600 lid forming machine Max 35 mm positive forming, 15 mm max negative forming. 600 x 320 mm forming area...
UM 18485
模型:瓦瑞斯- SR板宽度:- 970 mm吨位:- 8所示50 Kn Top Platen Open:- 460 mm Form Area:- 874 mm x 800 mm Heat Tunnel Zones..68 Depth of Draw:- 170 mm Max Bottom Platen Open.330......
UM 19499
With Unwind, form, steel rule cutting and stacking. Servo. 425 mm feed length Max draw 120 mm 495 x 410 mm forming area 540 mm max width roll unwinder. 500 kN steel rule punch. ......
UM 18722
1mantbex
Email Id Required.
Subject Required.
Message Required.
Please enter First Name.
Please enter Last Name.
Please enter Company Name.
Please Select Country.
手机号码要求ed.
R. R. Plast Extrusions Pvt. Ltd.
Star Machines India
Please enter Requirements.
Please enter Mobile.
User Id Required.
User Id Not Valid.
Password Required.
Password must be between 4 and 15 characters long,and may consist of hyphen (-), underscores (_), dot (.),and asterix (*).
Confirm Password Required.
Password & Confirm Password do not match.
Your Name Required.
Please select Country.
Friend's Name Required.
朋友的电子邮件Id。
Friend's Email Id Not Valid.